Accu-Chek^® Performa 360° View

• Fast 5 second test time for quick and easy blood glucose testing
• Tiny sample size <0.6 µL with under-dosing detection. Up to 5 seconds to re-dose the same strip
• Fast fill strip. Blood sample is quickly absorbed by the test strip
• Ergonomic Design. Rubber grips make it easy to hold.
• Compensates for temperature variables. Performs at temperatures from 6^oC to 44^oC
• Compensates for the effects of humidity. Performs at relative air humidity of 10-90%
• Expired test strip alert notifies user when strips are close to expiration date
• Test reminders. Set up to 4 automatic reminders for different times throughout the day.
• Test averaging. Meter provides 7-,14-, and 30-day test averaging.
• 500 test result memory for improved blood glucose tracking
• Infrared downloading capability. Results can be downloaded to your computer using our data management products

• Meter Display: LCD
• Automatic Power: 90 seconds
• Auto power on with strip insertion
• Auto off when strip is removed (5 seconds)
• Auto off in 2 minutes if meter not used
• Power Supply: (1) 3V lithium battery (CR2032)
• Battery life: Approximately 2,000 readings
• Measurement Time: 5 seconds
• System Operating Conditions: 6°C to 44°C
• Meter Storage Conditions:
  • 25°C to +70°C without battery
  • -10°C to +50°C with battery
• Relative Humidity Operating Range: 10 to 90%
• Memory Capacity: 500 results with time and date
• Dimensions: 93 x 52 x 22 mm (L x W x H)
• Weight: Approximately 62.0 g (2.2 oz) with battery
• Data Port: Infrared (IR) window
• Test Principle: Electrochemical
• Test Averages: 7-, 14-, 30-day
• Other features: Hypo indicator, 4 customisable test reminders, general flag, auto control ID, automatic recognition and rejection of expired test strips.

Coding the meter
	Make sure the meter is off. Gently slide the code chip into the slot on the side of the meter. Leave the code chip in the meter until you open a new box of test strips.
Performing a test
	1. Insert the test strip.
	2. Verify that the code number displayed on the screen matches the code number on test strip container.
	3. A test strip and flashing blood drop symbol appear on the meter display. The meter is now ready to perform a blood glucose test.
	4 . Prick the side of your fingertip with your lancing device. How to use? Click here.
	5. Touch the drop of blood to the front edge of the yellow window of the test strip—do not apply to top of the strip or window. A flashing hour-glass symbol indicates enough blood has been applied.
	6. Your result appears after 5 seconds. Remove and discard the used test strips. Your meter will auto-off.

In addition to fingertip testing, the Accu-Chek^® Performa system can be used for testing on alternate sites, including the palm, forearm, upper arm, thigh or calf. Alternate site testing (AST) requires the use of a special lancet cap. Consult your healthcare professional to see if alternate site testing is suitable for you.

For more information, please see your Accu-Chek^® Performa Owner’s Booklet.

Data Management Software

• Accu-Chek^® 360˚ Diabetes Management System
• Accu-Chek^® Smart Pix device reader

Accu-Chek® Performa test strips
Accu-Chek® Multiclix lancets
Accu-Chek® Multiclix lancing device
Battery (CR2032)
Accu-Chek® Performa control solution